INTRODUCTION
| NO. | DESCRIPTION | DETAILS |
| 1 | COUNTRY OF ORIGIN | EU/ G7/ Asia, … |
| 2 | STANDARD: | ISO 4427/ EN 12201/ AS 4130/ ASTM D3035/ GB T13663 |
| 3 | CERTIFICATION: | BV/ SGS/ TUV/ CE/ OTC |
| 4 | MATERIAL | 100% Virgin Raw Material |
| 5 | END CONNECTION | Butt weld/ Flange Connection |
| 6 | NOMINAL DIAMETER | DN16 – DN 1800 |
| 7 | NOMINAL PRESSURE | 0.0 Mpa – 1.6 MPa |
| 8 | MARKING | Customized Laser Marking on surface |
| 9 | SUPPLING ABILITY | At least 100 m/2 days |
| 10 | COLOR | Black with blue stripe or customize |
| 11 | ADDITIONAL SERVICE | ODM & OEM Service Available |
CATEGORY
| NO. | PRODUCT CATEGORY | DETAILS |
| 1 | MUNICIPAL ENGINEERING PIPE SYSTEM | HDPE GSHP PipeHPDE Trenchless PipeHDPE Water Supply PipeHDPE Heat Fusion FittingsHDPE Siphon PipeHDPE Drainage PipeHDPE Corrugated Pipe |
| 2 | DREDGING ENGINEERING PIPE SYSTEM | HDPE Dredging pipeUHMWPE PipePlastic FloaterRubber Hose |
| 3 | HDPE GAS PIPE SYSTEM | HDPE Electrofusion FittingsHDPE Gas Pipe |
| 4 | AGRICULTURE IRRIGATION PIPE SYSTEM | HDPE Irrigation PipeHDPE Irrigation Pipe Fittings |
| 5 | POWER ENGINEERING PIPE SYSTEM | HDPE Cables Protective PipeMPP Cables Protective Pipe |
| 6 | MINING PIPE SYSTEM | HDPE Mining Tailing PipeHDPE Pipe for Drawing Out MethaneHDPE Steel Mesh Reinforced Pipe |
PROPERTY
| NO. | CHARACTERISTICS | REQUIREMENTS |
| 1 | SPECIFIC GRAVITY, G/CM3 (20°C) | 0.941 – 0.965 |
| 2 | LONGITUDINAL REVERSION, % (110°C) | <=3 |
| 3 | OXIDATION INDUCTION TIME, MIN (200°C) | >=20 |
| 4 | EXTENSION RATE AT BREAK, % | >=350 |
| 5 | MELT MASS FLOW RATE, G/10 MIN (195°C , 5KG) | Change of MFR by processing ± 20 % |
| 6 | HYDROSTATIC STRENGTH 20℃, HOOP STRESS: PE100 12.4MPA, PE80 9.0MPA,100H80℃, HOOP STRESS: PE100 5.4MPA, PE80 4.5MPA, 165H80℃, HOOP STRESS: PE100 5.0MPA, PE80,4.0MPA, 1000H | No failure No failure No failure |
FEATURES
1. Non-toxic. The HDPE material is non-toxic and tasteless. It belongs to green building materials and never scaling through the strict health test, which can effectively improve the water quality.
2. Low flow resistance. The Smooth inner wall is easy for pipeline transportation. Under the same condition, HDPE pipe’s delivery capacity can be increased by 30%, as its roughness is much less than that of steel pipe and glass reinforced pipe.
3. No Leakage. HDPE pipe is connected in the ways of butt fusion, socket fusion and electrofusion, which means the strength of joint point is higher than tube itself.
4. Excellent Flexibility. HDPE pipes could be coiled for the small diameter products. Also, it could be slightly bended for the large diameter products, which will be much more convenient in the construction site.
5. Good resistance ability for scratch. HDPE pipe is 4 times the wear resistance of steel pipe, which means HDPE pipe has longer service life and better economical efficiency.
6. Convenient for construction. PE pipe could be installed in a variety of trenchless ways, so it is very convenient for construction and installation.
7. Long life-span. Designed 50 years’ service life under rated temperature and pressure.
8. Lower operation and maintenance costs. HDPE pipe is not only convenient to transport and install, but also greatly reduce the worker’s labor intensity and improve work efficiency.
