1. CHOKE & KILL HOSES
Application:
- Choke & Kill Suitable for H2S
- Working Temperature -20F to 250F
- Higher temperature available upon request
- Max Length: 200 ft.
Specification:
- ID: 2 – 5 inches
- Test Pressure: up to 22.500 PSI
- Working Pressure: up to 15.000 PSI
Hose Construction:
- Liner compounded for maximum resistance to gas permeation
- Stainless Steel Liner (optional)
- Stainless Steel Armored (optional)
- Maximum operating temperature 250°F
- H2S and CO2 compatible
- Certified factory graph test reports furnished with every hose
- Fire retardant – 700°C for 30 minutes
2. ROTARY & VIBRATOR HOSES
Application:
- Mud, Mud Booster/Jumper, Decoking, Motion Compensator Hoses
- Working Temperature: -20°F to 250°F
- Max Length: 200 ft.
Specification:
- ID: 2 – 4 inches
- Working Pressure: 5000 – 15000 PSI
- Test Pressure: 7500 – 22500 PSI
Hose Construction:
- Copper State Full Flow Rotary Hose Coupling
- Steel Cable
- Abrasive Resistant Fire Retardant Cover
- Secondary Carcass
- 4, 6 and 8 Layer Wire Reinforcement
- Primary Carcass
- Oil-Resistant Tube
3. CEMENTING HOSES
Application:
- Cementing and Acidizing Service
- Working Temperature: -20°F to 250°F
- Max Length: 200 ft.
Specification:
- ID: 2 – 4 inches
- Working Pressure: 5000 – 15000 PSI
- Test Pressure: 7500 – 22500 PSI
Hose construction:
- Tube: EPDM
- Reinforcement: multiple plies of synthetic textile and high tensile spiral wire.
- Cover: black, oil, abrasion and ozone resistant CR+
4. BOP CONTROL HOSES
Application:
- BOP control lines
Specification:
- Working Temperature: -40 °F to 250 °F
- Available IDs: ½”, ¾”, 1”, 1-1/4”, 1-1/2” & 2”
- Safety Factor: 4 to 1
- Max Length: 200 ft.
Hose construction:
- Tube: black, oil resistant synthetic rubber
- Reinforcement: multiple plies of synthetic textile and high tensile spiral wire
- Cover: multiple layers of fire retardant material with a stainlesssteel outer casing
5. FLEXIBLE FLOW LINES
Application:
- An ideal hose for oil and gas gathering, test, lines, injection lines, hydraulic control lines, acidizing lines, production lines, or risers to floating or fixed surface facilities
Specification:
- ID: 2 – 3 inches
- Working Pressure: 5000 – 15000 PSI
- Test Pressure: 7500 – 22500 PSI
Hose construction:
- Continuous stainless steel liner
- Other type end fittings available
6. MULTI-PURPOSE OILFIELD SERVICE HOSES
Application:
- Designed for service as discharge hose for reverse circulations, acidizer/cement service solution equipment, mud tank jetting, instrument blow down service, and rotary/vibrator service on portable drilling units, workover rigs and seismograph equipment.
- Exceeds requirements of API 7K for minimum safety factor: 2½ to 1 burst pressure.
Specification:
- Working Temperature: -40°F to +250°F (-40° to +121°C)
- H2S suitable with terminating connections meeting requirements of MR-01-75, latest edition
- Also available with 7500 PSI WP – Spec 2 WEO 168
Hose Construction:
- Tube: black neoprene, high-grade (cr+)
- Reinforcement: multiple spiral plies of special high
- tensile steel wire, each separated by a rubber layer
- Cover: MSHA accepted oil, weather and abrasion-resistant red synthetic rubber cover
- Synthetic outer cover added for abrasion resistance
- Optional: stainless steel outer protective armor available